Each headlight setting should be labeled by a separate symbol, and these symbols are almost always the same from vehicle to vehicle. Identify the indicator symbol for each setting. These lights are more intense and create a greater amount of road glare, so you should only use them when other cars are not present or nearby. The high beams can be turned on by pushing or pulling on the turn signal lever forwards or backwards. This setting is usually on a stick on the steering column, sometimes the stick that controls your turn signal, and is always separate from the low beam control. The "main beam," "high beam," or "brights" are not found on the low beam control.They should be used during poor visibility conditions, like fog, rain, snow, and dust. Fog lights use a wide, downward-pointing light to illuminate the road. The "fog lights" may also be positioned on this dial, but some car manufacturers place the fog light control on a separate button located directly next to the standard headlight controls.These headlamps provide forward and lateral light while minimizing glare, so they should be used on crowded roads when other vehicles are less than 65 yards (60 meters) ahead of you. The "low beam" or "dipped beam" setting is usually the next setting.These lights are orange in color on the front and red on the rear of the vehicle. The parking lights are the first setting on most cars.The different settings are indicated by separate symbols, and you should feel the dial “click” into place as it passes into each setting. ![]() Grab the control dial between your thumb and index finger and rotate it until it reaches the appropriate setting. If you forget and do completely drain the battery, you will need to jump start your car to get it going again. Keeping the headlights on while the vehicle is off can drain the automobile's battery, and the car will not turn on later if the battery is drained dry.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |